MOT Status
ValidMileage
131,834 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension rod pin or bush excessively worn anti roll bar link (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension rod pin or bush excessively worn anti roll bar link (5.3.4 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Horn not working (7.7 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust system insecure (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp aim unable to be tested (4.1.2 (b))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Axle suspension components corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear most (2.4.G.2)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear most (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened offside and nearside (3.5.1i)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Shock absorber has slight corrosion to the casing offside and nearside (2.7.2a)
front exhaust bracket is broken exhaust is still supported
nearside and offside rear brakes are binding sightly
offside rear brake pipe has surface corrosion
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
front exhaust bracket is broken exhaust is still supported
nearside and offside rear brakes are binding sightly
nearside front tyre outter sidewall has a cut in it
offside rear brake pipe has surface corrosion
Brake pipe slightly corroded (3.6.B.2c)
nearside front tyrewall perished
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SG06 HJE is a 2006 Toyota Aygo in Grey with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 72%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SG06 HJE, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SG06 HJE?
You can check the full history of SG06 HJE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SG06 HJE registered?
SG06 HJE is a 2006 Toyota Aygo, first registered on 16 March 2006.
Is SG06 HJE safe to buy?
The MOT history for SG06 HJE shows 25 tests with a 72% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SG06 HJE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SG06 HJE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.