2012 Fiat Scudo

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp aim too high and too far to the right. (4.1.2 (a))

Rear Exhaust silencer insecure rear hanger broke exhaust on axle (8.1.1 (b) (i))

Windscreen washer not working (3.5 (a))

Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust emissions exceed manufacturer's specified limit limit plate 0.51 (8.2.2.2 (a))

Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Front Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Both bottom arm front and rear bushes perishing

Rear Exhaust back box rear hanger broken however system still secure

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Rear Exhaust system not adequately supported (7.1.1)