2001 Toyota Yaris

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Play in steering rack inner joint(s) ()

under trays / engine / body covers fitted at time of test restricting the view of some components

Copious amounts of underseal applied to repairs

Corrosion starting around rear axle beam mountings

Front suspension strut casings corroded

Nasty corrosion starting on rear brake back plates, rear subframe assembly and rear suspension components

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside front brake hose incorrectly routed around ABS sensor wire

Nearside indicator repeater lens cover missing

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired Axle beam mounting (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is inadequately repaired Axle beam mounting (5.3.6 (a) (i))

Corrosion starting around rear axle beam mountings

Front brake release nearing maximum 30% limit

Front suspension strut casings corroded

Nasty corrosion starting on rear brake back plates, rear subframe assembly and rear suspension components

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside front brake hose incorrectly routed around ABS sensor wire

Nearside indicator repeater lens cover missing

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle beam mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mounting (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Service brake lagging in operation low & slow (1.2.1 (d))

Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle beam mounting (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front suspension strut casings corroded

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Worn inside edge (5.2.3 (e))

Nearside front brake hose incorrectly routed around ABS sensor wire

Nearside side repeater lens missing

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge Worn inside edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear brake back plates, rear subframe assembly and rear suspension components corroded

Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Front Play in steering rack inner joint(s) ()

Subframe mounting prescribed area is corroded but not considered excessive O/S and N/S rear (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Play in steering rack inner joint(s) ()

Subframe mounting prescribed area is corroded but not considered excessive O/S and N/S rear (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Top brake light not functioning.

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in nearside rear tyre

Tyre worn close to the legal limit (4.1.E.1)

n/s rear tyre perishing and cracking

slight play in steering rack

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in nearside rear tyre

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Tyre worn close to the legal limit (4.1.E.1)

n/s rear tyre perishing and cracking

slight play in steering rack

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s rear tyre perishing and cracking

Offside Rear wheel bearing rough when rotated (2.6.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s rear tyre perishing and cracking

slight play in steering rack n/s

slight play in steering rack

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

slight play in steering rack

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nail in nearside rear tyre

rear wiper rubber split

slight play in steering rack

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper blade deteriorated (8.2.2)