MOT Status
ValidMileage
79,774 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
underside of vehicle undersealed
Nearside Front Headlamp aim too low (4.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
underside of vehicle undersealed
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe prescribed area (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe prescribed area (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Rear bumper crossmember corroded
both inner sill backs corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe prescribed area (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe prescribed area (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Rear bumper crossmember corroded
both inner sill backs corroded
Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive under body area around suspension components (5.3.6 (a) (i))
both sill backing areas corroded but not exessive
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body area [axle mount] (5.3.6 (a) (i))
Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body area [axle mount] (5.3.6 (a) (i))
Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive under body area around suspension components (5.3.6 (a) (i))
both sill backing areas corroded but not exessive
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
structure of vehicle corroded to varying degrees
Hazard warning lamps inoperative (4.4.1 (e))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
structure of vehicle corroded to varying degrees
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
front brakes only just met imbalance level and front discs corroded on inner face, repair needed
Brake hose has slight corrosion to ferrules all (3.6.B.4e)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Brake hose has slight corrosion to ferrules all (3.6.B.4e)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Exhaust system not adequately supported (7.1.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SG56 CGV is a 2006 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SG56 CGV, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SG56 CGV?
You can check the full history of SG56 CGV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SG56 CGV registered?
SG56 CGV is a 2006 Toyota Aygo, first registered on 6 September 2006.
Is SG56 CGV safe to buy?
The MOT history for SG56 CGV shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SG56 CGV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SG56 CGV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.