2006 Toyota Aygo

Emissions unable to be completed vehicle emitting excessive blue smoke (8.2.1.2 (d))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded and holed (6.1.1 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced sub frame corroded (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced under side of vehicle (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear flexi (1.1.11 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front brake discs poor condition and slightly fluctuating

Headlamp lens slightly defective both cloudy/faded (4.1.1 (b) (i))

rear wiper defective

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front brake discs poor condition and slightly fluctuating

Headlamp lens slightly defective both cloudy/faded (4.1.1 (b) (i))

rear wiper defective

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Both rear wheel bearings not fully checked due to binding brakes

Nearside Front wheel bearing not fully checked due to binding brake

Nearside Rear brake binding slightly

Nearside brake binding slightly

Offside Rear brake binding slightly

Both rear wheel bearings not fully checked due to binding brakes

Nearside Front wheel bearing not fully checked due to binding brake

Nearside Rear brake binding slightly

Nearside brake binding slightly

Offside Rear brake binding slightly

Offside Registration plate lamp not working (1.1.C.1d)

Brake pipe excessively corroded Front to nearside rear (3.6.B.2c)

Brake pipe excessively corroded Front to offside rear (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has had the tread recut (4.1.D.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

rear brake application uneven (3.7.B.2)

Nearside rear wheel bearing not fully checked due to binding brake

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

rear brake application uneven (3.7.B.2)

Both front wheel bearings not fully checked due to binding brakes

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside front brake binding slightly

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)