2009 Nissan Micra

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement both front wishbone rear bush (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorbers has a reduced damping effect corroded both (5.3.2 (d))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions not tested (8.2.1.2 (d))

Front Anti-roll bar linkage ball joint excessively worn both sides (5.3.4 (a) (i))

Front Position lamp not working both sides (4.2.1 (a) (ii))

Nearside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn wishbone rear bush (5.3.4 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Tyre tread depth below requirements of 1.6mm both sides (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)

slight noise on o/s/r wheel bearing

Front Sub-frame has slight play in a pin/bush (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Front Sub-frame has slight play in a pin/bush (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Road wheel with a slightly distorted bead rim (4.2.A.1a)

Tyre worn close to the legal limit (4.1.E.1)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)