2009 Hyundai I10

flexy exhaust worn

Nearside Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar damaged but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Sub-frame corroded but not seriously weakened at spring mounting (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced front two areas (6.1.1 (c) (i))

advise rusting to front suspension arms

Nearside Front Brake disc significantly and obviously worn rear face (1.1.14 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brake disc significantly and obviously worn rear face (1.1.14 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)