Free Car Check
2012 Isuzu D-max Utah D/c Int-cooler Td A
MOT Status
ExpiredMileage
86,561 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to block connector (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Back bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Front Registration plate does not conform to the specified requirements Obscured by bull bar (0.1 (d))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer provides insufficient washer liquid all (3.5 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to block connector (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Back bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))
Offside Front Play in steering rack inner joint(s) ()
Electronic stability control warning lamp indicates a fault (7.12 (e))
Front Registration plate does not conform to the specified requirements characters incorrectly spaced (0.1 (d))
Nearside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Registration plate does not conform to the specified requirements characters incorrectly spaced (0.1 (d))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))
Offside Front Play in steering rack inner joint(s) ()
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" (5.3.4 (a) (i))
Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "D" (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view In zone A less 10mm diameter (3.2 (a) (i))
Windscreen damaged but not adversely affecting driver's view Out side zone A less 40mm diameter (3.2 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn Drop link (5.3.4 (a) (i))
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view In zone A less 10mm diameter (3.2 (a) (i))
Windscreen damaged but not adversely affecting driver's view Out side zone A less 40mm diameter (3.2 (a) (i))
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Isuzu D-max Utah D/c Int-cooler Td A?
Based on 4,760 MOT tests across 437 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SG62 WJC is a 2012 Isuzu D-max Utah D/c Int-cooler Td A in Black with a 2,499cc diesel engine. This vehicle has been through 10 MOT tests with a personal pass rate of 60%.
Across all 2012 Isuzu D-max Utah D/c Int-cooler Td A models, the average MOT pass rate is 76.5% with a typical mileage of 81,525 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Isuzu D-max Utah D/c Int-cooler Td A fails its MOT is shock absorber has an excessively worn bush, accounting for 47 recorded failures. If you're considering buying SG62 WJC, it's worth having these areas checked by a mechanic before committing.
The Isuzu D-max Utah D/c Int-cooler Td A typically stays on UK roads for around 14 years. At 14 years old, this Isuzu D-max Utah D/c Int-cooler Td A is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SG62 WJC?
You can check the full history of SG62 WJC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SG62 WJC registered?
SG62 WJC is a 2012 Isuzu D-max Utah D/c Int-cooler Td A, first registered on 19 October 2012.
Is SG62 WJC safe to buy?
The MOT history for SG62 WJC shows 10 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SG62 WJC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SG62 WJC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.