2004 Honda Jazz

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced and outer sills also repair covered in underseal (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material front to rears (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bonding serperating (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount area (5.3.6 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Central Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Headlamps matched pair are not the same colour (4.1.4 (d))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)