2006 Peugeot 107

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Exhaust has a major leak of exhaust gases Exhaust manifold to cylinder head (7.1.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill and inner wheel arch (2.4.A.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Registration plate lamp not working (1.1.C.1d)

Central Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement bushes starting to crack (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement bushes starting to crack (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Headlamp aim too far to the right (1.8)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement bushes starting to crack (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear tyre starting to crack

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement bushes starting to crack (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear tyre starting to crack

Nearside Front Front position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Front position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

some metal brake pipes coated in grease

both front to rear metal brake pipes showing corrosion at the rear

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front discs slightly corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front discs slightly corroded