MOT Status
ValidMileage
110,615 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Body not fully secure (6.2.2 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
rear suspension area is corroded.
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Body not fully secure (6.2.2 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
rear suspension area is corroded.
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear suspension area is corroded.
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear suspension area is corroded.
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))
unable to assess some components and structure due to undertrays being fitted
Brake pipe corroded, covered in grease or other material front 2 backs above rear subframe (1.1.11 (c))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Brake pipe slightly corroded FRONT TO BACKS (3.6.B.2c)
HEADLAMPS CLOUDY
Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded INTO FLEXIBLE HOSE (3.6.B.2c)
Parking brake lever has no reserve travel (3.1.6b)
Brake pipe slightly corroded FRONT TO BACKS (3.6.B.2c)
HEADLAMPS CLOUDY
Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Inner edge of wheel bin repaired
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
covers fitted
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner edge of wheel been repaired
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
covers fitted
Both front brake pipes rusted
Both rear brake discs very rusted on inner surface
Both rear brake pipes rusted
Offside front tyre worn on edge
Engine covers fitted obscuring some components in the engine bay
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Under-trays fitted obscuring some underside components
exhaust centre mount broken
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front coil spring broken (2.4.C.1a)
Engine covers fitted obscuring some components in the engine bay
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Under-trays fitted obscuring some underside components
exhaust centre mount broken
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Under-trays fitted obscuring some underside components
Exhaust system not adequately supported (7.1.1)
Nearside Front coil spring broken (2.4.C.1a) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside rear brake juddering severely (3.7.A.5b)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
SRS MALFUNCTION LIGHT ON
How Reliable is the Mercedes-benz Clk?
Based on 1,410,029 MOT tests across 83,874 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SH06 OWB is a 2006 Mercedes-benz Clk in Blue with a 1,796cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2006 Mercedes-benz Clk models, the average MOT pass rate is 75.4% with a typical mileage of 73,393 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Clk fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 59,319 recorded failures. If you're considering buying SH06 OWB, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Clk typically stays on UK roads for around 28 years. At 20 years old, this Mercedes-benz Clk is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SH06 OWB?
You can check the full history of SH06 OWB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SH06 OWB registered?
SH06 OWB is a 2006 Mercedes-benz Clk, first registered on 31 May 2006.
Is SH06 OWB safe to buy?
The MOT history for SH06 OWB shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SH06 OWB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SH06 OWB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.