2008 Honda Cbf 1000-7

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively front and rear. (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both front worn and pitted. (1.1.14 (a) (ii))

Handlebar deformed but serviceable bent. (2.2.1 (c) (i))

Indicator switch insecure nearside switchgear loose. (4.4.2 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame corroding behind radiator. (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened worn. (1.1.14 (a) (ii))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement play in rear shock lower bush. (5.3.4 (a) (i))

centre stand partially seized and sticks down unless lifted by hand.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Chain rubbing

Front Brake fluid below minimum mark (1.1.10 (d) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))