MOT Status
ValidMileage
225,986 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both (1.4.2 (a) (i))
Rear Towbar component corroded, but not excessively complete unit (6.1.6 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear under body (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both (1.4.2 (a) (i))
Rear Towbar component corroded, but not excessively complete unit (6.1.6 (a))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear under body (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corrosion (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corrosion (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Play in steering rack inner joint(s) ()
Rear Shock absorbers has a reduced damping effect 2 x rear shock absorbers (5.3.2 (d))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corroded (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corroded (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Play in steering rack inner joint(s) ()
Fuel tank insecure fuel tank straps broken (6.1.3 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corroded (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point corroded (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Play in steering rack inner joint(s) ()
Rear Brake disc worn, but not excessively discs (1.1.14 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))
Front Inner track rods slight play
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Rear Brake disc significantly and obviously worn discs (1.1.14 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened discs (1.1.14 (a) (ii))
Front Inner track rods slight play
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension rod ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension rod ball joint excessively worn (5.3.4 (a) (i))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Suspension rod ball joint has slight play (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear fog lamp not working (1.3.2b)
slight play in n/s/f steering arm
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SH08 KFP is a 2008 Vauxhall Vivaro in White with a 1,995cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2008 Vauxhall Vivaro models, the average MOT pass rate is 66.7% with a typical mileage of 110,885 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying SH08 KFP, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 18 years old, this Vauxhall Vivaro is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SH08 KFP?
You can check the full history of SH08 KFP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SH08 KFP registered?
SH08 KFP is a 2008 Vauxhall Vivaro, first registered on 1 July 2008.
Is SH08 KFP safe to buy?
The MOT history for SH08 KFP shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SH08 KFP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SH08 KFP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.