MOT Status
ExpiredMileage
121,460 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))
Sub-frame corroded but not seriously weakened front and rear heavily undersealed (5.3.3 (b) (i))
Front Headlamp aim projected beam image is obviously incorrect n/s and o/s (4.1.2 (c))
Nearside Front Coil spring with an unsafe modification n/s front fouling inner wing (5.3.1 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Sub-frame corroded but not seriously weakened front and rear heavily undersealed (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement inner bush (5.3.4 (a) (i))
advise front light lenses
both front drop link bushes perrished
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Lower Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front of arch (inner) (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & outer sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front of arch (inner) (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output Both headlamps slightly frosted (4.1.4 (b))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Outer sill corroded
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Nearside Rear Tyre worn close to legal limit/worn on edge & cracking (5.2.3 (e))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))
Rear Beam axle corroded
Rear Coil spring corroded Both (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mount areas (5.3.6 (a) (i))
Underside of vehicle in a corroded condition
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing cracking in treads (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
rear shocks\ corroded
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Shock absorbers has slight external damage to the casing both corroded (5.3.2 (b))
Coil spring corroded both front (5.3.1 (b) (i))
Coil spring corroded both rear (5.3.1 (b) (i))
Indicator switch insecure (4.4.2 (a) (i))
both front shock absorbers corroded
both rear shock absorbers corroded
under body front to rear badly corroded
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Coil spring corroded both front (5.3.1 (b) (i))
Coil spring corroded both rear (5.3.1 (b) (i))
Indicator switch insecure (4.4.2 (a) (i))
both front shock absorbers corroded
both rear shock absorbers corroded
under body front to rear badly corroded
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear slight bind advise further brake inspection
Offside Rear tyre split in tread
both front shock absorbers corroded where spring is seated
engine management light on
front cross member has surface corrosion
oil leak /engine oil low
Nearside Rear Brake pipe excessively corroded front to rear (3.6.B.2c)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords in tread (4.1.D.1a)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Rear Brake pipe excessively corroded front to rear (3.6.B.2c)
Offside front brake excessively fluctuating (3.7.B.3)
Semaphore indicator switch faulty (1.4.C.1c)
Offside Rear Braking system leaking brake pipe front to rear (3.6.A.1) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear slight bind advise further brake inspection
Offside Rear tyre split in tread
both front shock absorbers corroded where spring is seated
engine management light on
oil leak /engine oil low
E M light on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
both rear tyres split in tread and wearing on outer edges
oil leak
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Stop lamp not working (1.2.1b)
Offside rear brake binding (3.7.B.1)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
E M light on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
both rear tyres split in tread and wearing on outer edges
oil leak
eng mang light
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
eng mang light
eng mang light on
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
eng mang light on
Exhaust system not adequately supported (7.1.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SH08 YTG is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 53.6%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SH08 YTG, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SH08 YTG?
You can check the full history of SH08 YTG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SH08 YTG registered?
SH08 YTG is a 2008 Toyota Aygo, first registered on 2 May 2008.
Is SH08 YTG safe to buy?
The MOT history for SH08 YTG shows 28 tests with a 53.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SH08 YTG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SH08 YTG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.