2013 Yamaha Yzf

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Shock absorber has negligible damping effect rear pivot bearings seized (5.3.2 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Headlamp aim too high (4.1.2 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Brake component insecure Brake pads (1.1.21 (c))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Headlamp aim too high (4.1.2 (a))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Registration plate inscription illegible (0.1 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Nearside Rear Footrest slightly loose footrest does not retain in upright position (6.2.12 (a))

Offside Rear Footrest slightly loose footrest does not retain in upright position (6.2.12 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement swinging arm (5.3.4 (a) (i))

Rear brake fluid low

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front All direction indicators slightly discoloured (4.4.3 (a))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain excessively tight (6.2.1d) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)