2005 Toyota Aygo

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Brake performance not tested due to corrosion (1.2.1 (g))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill holed (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill holed and previous repair falling off (5.3.6 (a) (i))

Headlamp lens slightly defective both front cloudy (4.1.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing cracked and tyre 16 years old (5.2.3 (d) (ii))

front wiper streaky

rear underside of chassis holed but outwith prescribed area

rear wiper defective

underside of vehicle corroded and weak but not excessive at time of test

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Rear Service brake excessively binding (1.2.1 (f))

Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Front Exhaust silencer insecure (8.1.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

brake disc slightly pitted (3.5.1h)