2006 Toyota Aygo

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front and both rear brake pipes painted

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front and both rear brake pipes painted

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Headlamp damaged but light output not reduced brackets have been glued (1.7.5a)

Rear front brake fluctuating, but not excessively (3.7.B.3)

Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. rear brakes are noisy (3.7.B.6b)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Body insecure and dangerous to other road users front bumper (6.1.B.1b)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front brake discs worn/corroded

nearside front to rear brake pipe slightly corroded at rear

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust slack in rear clamp

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust slack in rear clamp