2006 Mazda MX-5

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner arch (5.3.6 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

general surface corrosion on underside of vehicle

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside inner sill (6.1.1 (c) (i))

Rear Exhaust has a minor leak of exhaust gases rear silencer blow (6.1.2 (a))

general surface corrosion on underside of vehicle

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Brake fluid warning lamp illuminated (1.1.10 (f))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Corrosion to underside, chassis and suspension

Engine Knocking/noisy

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Service brake application uneven across the axle (3.7.D.2b)

Corrosion to underside, chassis and suspension

Engine Knocking/noisy

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Inner Brake pad(s) wearing thin (3.5.1g)

INNER FACES OF FRONT DISCS ARE LIPPED WITH CORROSION

O/S/R BRAKE DISC HAS CORROSION ON OUTER FACE

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

REAR BRAKES STICKING SLIGHTLY

Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Both front wiper blades torn