2006 Toyota Aygo

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both nearside and offside (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Front Brake hose has slight corrosion to ferrule both nearside and offside (1.1.12 (f) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement bush deteriorated/split (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule both nearside and offside (1.1.12 (f) (i))

Horn not working (7.7 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect left hand drive headlamp fitted (4.1.2 (c))

Offside Front Anti-roll bar linkage insecurely attached bush missing (5.3.3 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake hose has slight corrosion to ferrule both nearside and offside (1.1.12 (f) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement bush deteriorated/split (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule both nearside and offside (1.1.12 (f) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Steering locking device missing track rod end . split pin missing from castellated nut. (2.1.3 (d))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Obligatory mirror slightly damaged rear view (3.3 (b) (i))

hand brake travel becoming poor

off side rear hand brake reading becoming low

both front shock absorber bodies corroded.

both rear shock absorber bodies corroded.

front sub frame corroded.

hand brake travel poor.

off side rear brake flex hose end corroded.

slight damage to near side front windscreen.

Horn not working (7.7 (a) (ii))

Offside Rear Brake pipe excessively corroded to flex hose. (1.1.11 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material to flex hose. (1.1.11 (c))

both front shock absorber bodies corroded.

both rear shock absorber bodies corroded.

front sub frame corroded.

hand brake travel poor.

slight damage to near side front windscreen.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

front discs heavy worn