2006 Toyota Aygo

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and sill to floor (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and sill to floor (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Central Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (7.1.1 (a) (i))

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (7.1.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

floors and inner sills have surface corrosion

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

floors and inner sills have surface corrosion

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Front suspension has slight movement at a wishbone pin or bush bush split/perished (2.5.A.1c)

middle section exhaust hanger corroded off

Nearside Front Bonded suspension unit deteriorated and cannot function as intended suspension top mount (2.4.F.3)

Nearside Front Shock absorber has an excessively worn bush suspension top mount (2.7.4)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)