2008 Toyota Aygo

All underbody including suspension and braking components has signs of repairs covered in underseal

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Coil spring corroded all four (5.3.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced shock absorbers mounting area repaired and covered in underseal (6.1.1 (c) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced shock absorbers mountings (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

all sils heavily welded

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sil (6.2.2 (d) (i))

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

all sils heavily welded

Both sils heavily under sealed

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills (5.3.6 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Items removed from driver's view prior to test

car heavily underseald

Stop lamp(s) all not working (4.3.1 (a) (iii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Position lamp not working both (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Front Lower Suspension arm locating pin locking device missing both (2.4.G.3b)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Both front brake discs corroded on inner facings.

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak