2008 Peugeot 107

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

clutch worn

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

clutch worn

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

General underbody corrosion

Front Exhaust system insecure Bracket snapped (6.1.2 (a))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases Clamp (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

General underbody corrosion

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Brake pipe excessively corroded Front to rear, Rear section (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Middle outer sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both side outer sills (5.3.6 (a) (i))

Rear Tyre tread depth below requirements of 1.6mm Both sides (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides inner (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive Both side inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both sides outer sills (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement BOTH FRONT LOWER - REAR BUSH (5.3.4 (a) (i))

Horn not working (7.7 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)