2011 Chevrolet Spark

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pipe corroded, covered in grease or other material all around (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

general under body / suspension corrosion all around

Central Exhaust mounting defective (6.1.2 (a))

Exhaust system corroded to excess and leak of exhaust gases

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Surface corrosion evident all under body, all brakes, all steering & all suspension parts

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch missing (4.5.3 (a))

Central Exhaust mounting defective (6.1.2 (a))

Exhaust system corroded to excess and leak of exhaust gases

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Surface corrosion evident all under body, all brakes, all steering & all suspension parts

Rear Engine mounting small play

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear road wheel slightly tight when rotated by hand

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear road wheel slightly tight when rotated by hand

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear slight blinding of both rear wheels

exhaust system rusty

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear slight blinding of both rear wheels

exhaust system rusty

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

middle exhaust hanger broken

Nearside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

middle exhaust hanger broken