MOT Status
ExpiredMileage
183,316 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded (3.6.B.2c)
rr brakes bal. ns lower
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Brake load sensing valve linkage stiff (3.6.E.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
rr brakes bal. ns lower
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
both front brake disc slightly deteriorated
service brake pedal anti slip pad slightly deteriorated
slight cracking on o/s rear tyre but not deep enough to reatch ply or cords
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front An item not tested (Manual)
Offside Front front brake binding (3.7.B.1)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
both front brake disc slightly deteriorated
service brake pedalantislip pad slightly deteriorated
slight cracking on o/s rear tyre but not deep enough to reatch ply or cords
13% imbalance on front service brakes
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Brake pipe excessively corroded (3.6.B.2c)
Centre Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Headlamp aim too low (1.8)
Offside Rear Tie bar/rod locating pin insecure (2.4.G.3a)
Offside Rear Tie bar/rod locating pin locking device missing (2.4.G.3b)
13% imbalance on front service brakes
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Centre Rear Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Centre Rear Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake pad(s) wearing thin (3.5.1g)
Centre Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim too low (1.8)
Offside Rear Stop lamp not working (1.2.1b)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brake pad(s) wearing thin (3.5.1g)
Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SIL 6432 is a 2000 Ford Focus in White with a 1,753cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 2000 Ford Focus models, the average MOT pass rate is 67.9% with a typical mileage of 90,238 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying SIL 6432, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 26 years old, this Ford Focus is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SIL 6432?
You can check the full history of SIL 6432 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SIL 6432 registered?
SIL 6432 is a 2000 Ford Focus, first registered on 8 December 2000.
Is SIL 6432 safe to buy?
The MOT history for SIL 6432 shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SIL 6432 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SIL 6432. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.