2003 Aprilia RX50

Front Steering headbearing has slight free play (2.2.2)

Offside Front flasher held on with tape

Seat held on with tape

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Clutch lever shortened. (6.2.1g)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings are slightly rough (2.3.5b)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear Brake pedal cracked (3.1.2c)

Clutch lever shortened. (6.2.1g)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings are slightly rough (2.3.5b)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rev counter insecure.

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rev counter insecure.

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Nearside Front Clutch lever shortened. (6.2.1g)

Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Direction indicators affected by the operation of another lamp (1.5.1c)

Front Front mudguard insecure (2.3.7)

Front Fuel cap sealing washer missing (7.2.2c)

Front Horn is not a constant note (1.7.3c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Direction indicators not working (1.5.1c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Nearside Front Clutch lever shortened. (6.2.1g)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Wheel alignment slightly misaligned. (2.5.1)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Horn on weak side

Wheel alignment slightly misaligned. (2.5.1)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel spoke excessively loose (4.2.1b)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Riders seat insecure (6.2.1a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) DANGEROUS

Nearside Indicator switch insecure (1.5.4) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Front wheel bearings have excessive free play (2.3.5b)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

front h/lamp bulbholder insecure