MOT Status
ExpiredMileage
171,324 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Hazard warning lamps inoperative (4.4.1 (e))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))
Brake pipe corroded, covered in grease or other material 2x front to rears (1.1.11 (c))
Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arches corroded (5.3.6 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened axle corroded (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive jacking point corroded (5.3.6 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) ()
Suspension component mounting prescribed area is corroded but not considered excessive all over corrosion (5.3.6 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central outer rigger holed (5.3.6 (a) (i))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point holed (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive jacking point corroded (5.3.6 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) ()
Suspension component mounting prescribed area is corroded but not considered excessive all over corrosion (5.3.6 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Direction indicator not working delay in operation (4.4.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Brake cable damaged (1.1.15 (a))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Offside Front Shock absorbers damaged to the extent that it does not function (5.3.2 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn trailing arm bush (5.1.2 (b) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Fluid leak, but not excessive rad (8.4.1 (a) (i))
Nearside Front Play in steering rack inner joint(s) ()
Offside Front Play in steering rack inner joint(s) ()
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security BOX SECTION (6.2.2 (d) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security BOX SECTION (6.2.2 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 10mm circle within zone 'A' lower edge (8.3.1a)
Nearside Front Lower Ball joint has slight play (2.2.B.1f)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Lower Ball joint has slight play (2.2.B.1f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Fuel tank insecure (7.2.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
rear brake application uneven (3.7.B.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SJ03 GAS is a 2004 Vauxhall Vivaro in White with a 1,870cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2004 Vauxhall Vivaro models, the average MOT pass rate is 64.3% with a typical mileage of 110,099 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying SJ03 GAS, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 22 years old, this Vauxhall Vivaro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SJ03 GAS?
You can check the full history of SJ03 GAS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SJ03 GAS registered?
SJ03 GAS is a 2004 Vauxhall Vivaro, first registered on 28 June 2004.
Is SJ03 GAS safe to buy?
The MOT history for SJ03 GAS shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SJ03 GAS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SJ03 GAS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.