2003 Porsche 911

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Shock absorber corroded

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorber corroded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement coffin arm (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorber corroded

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Shock absorber corroded

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement coffin arm (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm inner edge (5.2.3 (e))

Nearside Front Tyre worn on inner edge and cracking

Nearside Rear Nail in tyre ()

Offside Front Tyre slightly damaged/cracking or perishing Cracking (5.2.3 (d) (ii))

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Child seat fitted not allowing full inspection of adult belt

Nearside and offside rear brake discs are very corroded.

Service brake juddering slightly (3.7.C.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Service brake juddering slightly (3.7.C.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc slightly pitted (3.5.1h)

Rear brake disc slightly pitted (3.5.1h)

Front Front position lamp(s) not working (1.1.A.3b)

Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc slightly pitted (3.5.1h)

Rear brake disc slightly pitted (3.5.1h)

rear brake pad discs rusty on inner face.

rear tyres worn on outer edges

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Rear brake disc slightly pitted (3.5.1h)