2004 Honda Stream

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting pipes (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting pipe (6.2.2 (d) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pipe excessively corroded flexy to hose pipe (1.1.11 (c))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe slightly corroded offside +nearside front (3.6.B.2c)

Brake pipe slightly corroded offside +nearside front to rear (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pipe slightly corroded offside +nearside front (3.6.B.2c)

Brake pipe slightly corroded offside +nearside front to rear (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Shock absorber has slight corrosion to the casing (2.7.2a)

Under-trays fitted obscuring some underside components

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

covers fitted not allowing full inspection

offsiderear and nearsiderear brake disks corroded

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

off side rear tyre under inflated

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)