2007 Jaguar S-type

Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/f and o/s/f sills (7.1.1 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

rear brakes binding

slight lay at both rear wheels

Suspension arm pin or bush worn but not resulting in excessive movement Both front arm (Front bushes ) (5.3.4 (a) (i))

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Suspension arm pin or bush worn but not resulting in excessive movement Both front arm (Front bushes ) (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin plus slight bind (1.1.13 (a) (ii))

Vehicle has full length plastic sill covers Vehicle has undertrays

Vehicle has full length plastic sill covers

Vehicle has undertrays

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner wall area (5.2.3 (d) (i))

Vehicle has full length plastic sill covers

Vehicle has undertrays

Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing around tread and walls. 245/40/18 (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

offside and nearside front inner wheel arch covers missing.

Oil leak, but not excessive (8.4.1 (a) (i))

Road wheel slightly distorted all four (5.2.2 (c) (i))

showing signs of corrosion throughout vehicle.

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, behind plastic cover (5.3.6 (a) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure around inner tread 245/40/18 (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Road wheel slightly distorted all four (5.2.2 (c) (i))

showing signs of corrosion throughout vehicle.

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords on inner wall (5.2.3 (d) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure Around inner wall 245/40/18 (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Road wheel slightly distorted all four (5.2.2 (c) (i))

front brake pads over half worn

Nearside Rear Tyre worn close to the legal limit 245/40/18 and cracking (4.1.E.1)

Offside Rear Tyre worn close to the legal limit and cracking (4.1.E.1)

Road wheel with a slightly distorted bead rim all four (4.2.A.1a)

front brake pads over half worn

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Rear Tyre worn close to the legal limit 245/40/18 and cracking (4.1.E.1)

Offside Rear Tyre worn close to the legal limit and cracking (4.1.E.1)

Road wheel with a slightly distorted bead rim all four (4.2.A.1a)

front brake pads over half worn

Nearside Front tyre worn on shoulders

Offside Front tyre worn on shoulders

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

both front tyres scrubbed on inner edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

front tyres just starting to scrub on inner treads.

rear brake pads starting to show signs of wear.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)