2008 Peugeot 107

Integral body structure is corroded but structural rigidity is not significantly reduced front to rear inner sills (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened including suspension components and mountings both sides (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Steering locking device missing (2.1.3 (d))

Offside Front Lower Steering locking device missing (2.1.3 (d))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Horn not working (7.7 (a))

Indicator switch inoperative Offside operation (4.4.2 (a) (ii))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill with in rear axle (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened Both front (1.1.14 (a) (ii))

Brake pad(s) wearing thin Both front inner pads (1.1.13 (a) (ii))

Coil spring corroded Both front (5.3.1 (b) (i))

Coil spring corroded Both rear (5.3.1 (b) (i))

Nearside Rear Seat belt retraction slow

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear underbody corroded

Service brake fluctuating, but not excessively Both front (1.2.1 (e))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases clamp missing (6.1.2 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Stop lamp not working (1.2.1b)

Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)