MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases (7.1.2)
Horn sounds harsh or grating (1.6.2e)
Nearside Front Direction indicator insecure (1.4.A.2b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Offside Front Direction indicator insecure (1.4.A.2b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp adversely affected by the operation of another lamp (1.7.5c)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Exharst slightly inscure
Middle row seat belt bracket damaged
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Odometer not working
Offside headlamp dim
Rear Seat belt stitching slightly frayed (5.2.2b)
Vehecle heaverly covered with underseal
Rear Brake pad(s) wearing thin (3.5.1g)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
all welding heavily covered in underseal
Horn not working (1.6.2a)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.C.1d)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
n/s miorror missing
underside badly corroded
whole chassis corroded
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Horn not working (1.6.2a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Outer Rear Body has slight corrosion (6.1.B.2)
O/S MIRROR DAMAGED SLIGHTLY
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Emissions not tested (7.0)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Steering arm has relative movement at its fixings (2.2.B.1h)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Side repeater incorrect colour (1.4.A.2f)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate deteriorated (6.3.1d)
Nearside Outer Rear Body has slight corrosion (6.1.B.2)
O/S MIRROR DAMAGED SLIGHTLY
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front Body has slight corrosion (6.1.B.2)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Inner Front Body has slight corrosion (6.1.B.2)
Offside Side repeater slightly discoloured (1.4.A.2f)
slight play in n/s/f inner rack joint
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Exhaust mounting missing (7.1.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
slight play in n/s/f inner rack joint
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Inner Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Ball joint has slight play (2.2.B.1f)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SK02 VMC is a 2002 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying SK02 VMC, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SK02 VMC?
You can check the full history of SK02 VMC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SK02 VMC registered?
SK02 VMC is a 2002 Mercedes-benz Vito, first registered on 7 May 2002.
Is SK02 VMC safe to buy?
The MOT history for SK02 VMC shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SK02 VMC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SK02 VMC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.