2003 Mercedes-benz Vito

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body near wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body near wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Driver's view of an obligatory external mirror materially affected by an obstruction (3.1 (a) (ii))

Position lamp not working both front (4.2.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps both (4.7.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material To rear (1.1.11 (c))

Underbody has tressas of filler and heavley seallanted

Underbody heavley seallanted

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centrall (6.1.1 (c) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength to rear inner sill exxcessivley corroded (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material To rear (1.1.11 (c))

Underbody has tressas of filler and heavley seallanted

Underbody heavley seallanted

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Brake pipe slightly corroded both main front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

engine cover fitted

exhaust corroded

heavily under sealed

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Brake pipe slightly corroded both main front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear position lamp(s) not working (1.1.A.3b)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

engine cover fitted

exhaust corroded

heavily under sealed

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside rear parking brake recording little or no effort 54kg (3.7.B.6a)

Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake hose slightly deteriorated both front (3.6.B.4d)

Brake hose slightly deteriorated both rear (3.6.B.4d)

Brake pipe slightly corroded both main front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt both (2.5.C.1a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

engine cover fitted

exhaust slightly coroded

heavily under sealed

Brake load sensing valve linkage seized (3.6.E.3)

Brake load sensing valve seized (3.6.E.3)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension spring mounting prescribed area is fractured (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Side repeater incorrect colour (1.4.A.2f)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear outer sill holed but not in prescibed area 35cm from suspension load point

offside front tyre load incorrect

Nearside Front Electrical wiring inadequately supported (1.9.2a)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear outer sill holed but not in prescibed area 35cm from suspension load point

offside front tyre load incorrect

Nearside Front Electrical wiring insecure (1.9.2a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both brake pipes along chassis slightly corrdoed

o/s n/s inner sills slighlty corroded

o/s n/s sills slightly corroded

slighlt play in o/s/f inner steering rack end

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Exhaust heat shield loose.

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Engine management light on

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Oil leak

Brake pipe slightly corroded (3.6.B.2c)

front and rear disc slightly corroded worn rusty pitted scored

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

brake disc slightly pitted (3.5.1h)

handbrake slighty high

Exhaust has part of the system slightly deteriorated (7.1.1a)

all wipers torn

Parking brake: efficiency below requirements (3.7.B.7)