MOT Status
ExpiredMileage
78,420 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement ns/os (5.3.4 (a) (i))
all underbody corosion
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement ns/os (5.3.4 (a) (i))
all underbody corosion
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced Axle (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))
Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bonded bushes weak & cracked (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bonded bushes weak & cracked (5.3.4 (a) (i))
Offside Rear Subframe mounting repair covered in underseal prescribed area (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened front subframe & suspension components corroded (5.3.3 (b) (i))
Sub-frame corroded but not seriously weakened rear subframe & suspension components corroded (5.3.3 (b) (i))
Nearside Front Brake disc significantly and obviously worn corroded (1.1.14 (a) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Brake disc significantly and obviously worn corroded (1.1.14 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bonded bushes weak & cracked (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bonded bushes weak & cracked (5.3.4 (a) (i))
Sub-frame corroded but not seriously weakened front subframe & suspension components corroded (5.3.3 (b) (i))
Sub-frame corroded but not seriously weakened rear subframe & suspension components corroded (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
underbody corrosion
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
underbody corrosion
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear (5.3.6 (a) (i))
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded to cylinder (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened at inner face (3.5.1i)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Front Exhaust system not adequately supported hanger broken (7.1.1)
Nearside Front suspension has excessive movement at a wishbone pin or bush back bush (2.5.A.1c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Registration plate lamp not working both (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened at inner face (3.5.1i)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SK06 YPE is a 2006 Peugeot 107 in Grey with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SK06 YPE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SK06 YPE?
You can check the full history of SK06 YPE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SK06 YPE registered?
SK06 YPE is a 2006 Peugeot 107, first registered on 29 March 2006.
Is SK06 YPE safe to buy?
The MOT history for SK06 YPE shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SK06 YPE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SK06 YPE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.