2006 Fiat Ducato

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced flexy mount (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced flexy mount (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and chassis (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and chassis (6.1.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced flexy mount (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Exhaust mounting defective Rubber mount (6.1.2 (a))

Front Power steering pipe/hose slightly corroded All pipes on steering rack (2.1.5 (g) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch near flexi mount (5.3.6 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch near flexi mount (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both rear perishing and cracking on outer walls (5.2.3 (d) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill / jacking point (5.3.6 (a) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill in two places (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger above exhaust tail pipe (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger in front of rear wheel (5.3.6 (a) (i))

Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Exhaust mounting defective Rubber mount (6.1.2 (a))

Front Power steering pipe/hose slightly corroded All pipes on steering rack (2.1.5 (g) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch near flexi mount (5.3.6 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch near flexi mount (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both rear perishing and cracking on outer walls (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

both rear inner sills corroded non-structural

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced by jacking point (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

both rear inner sills corroded non-structural

Brake pipe corroded, covered in grease or other material all. (1.1.11 (c))

Fuel pipe leaking (6.1.3 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Brake pipe corroded, covered in grease or other material all. (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

front brake fluctuating, but not excessively both (3.7.B.3)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Brake load sensing valve linkage seized (3.6.E.3)

Offside Front front brake juddering slightly (3.7.A.2b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front front brake juddering slightly (3.7.A.2b)