2011 Mitsubishi Outlander

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened and (Rear) (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Road wheel fixing missing O/F and O/R (5.2.1 (a) (i))

Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened and (Rear) (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material n/s/r o/s/r (1.1.11 (c))

Coil spring corroded n/s/r o/s/r (5.3.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge n/s/f o/s/f (5.2.3 (e))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

E M L on

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

E M L on

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)