MOT Status
ExpiredMileage
173,103 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp not working on dipped beam Both front. (4.1.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel. (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis. (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis. (5.3.6 (a) (i))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel. (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear panel and both rear inner sill. (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Coil spring (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel holed (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill panel (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc heat shields in poor condition
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing. (5.3.6 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Hand brake has little reserve travels.
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc heat shields in poor condition
Rear Exhaust mounting defective (6.1.2 (a))
Rear Exhaust mounting defective (6.1.2 (a))
Central Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Central Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Front position lamp(s) not working (1.1.A.3b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch (6.1.B.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Lower Suspension arm locating pin locking device missing (2.4.G.3b)
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill middle (6.1.B.2)
low effort o/s/r h/brake
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Direction indicator not working (1.4.A.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Stop lamp not working (1.2.1b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front front brake juddering slightly (3.7.A.2b)
Nearside Headlamp aim too high (1.8)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Headlamp aim too high (1.8)
Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Headlamp aim too low (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
nearside inner cv boot burst
Brake hose slightly deteriorated (3.6.B.4d)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
brake disc in such a condition that it is seriously weakened (3.5.1i)
Brake hose slightly deteriorated (3.6.B.4d)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SK52 CKA is a 2002 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying SK52 CKA, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SK52 CKA?
You can check the full history of SK52 CKA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SK52 CKA registered?
SK52 CKA is a 2002 Mercedes-benz Vito, first registered on 16 September 2002.
Is SK52 CKA safe to buy?
The MOT history for SK52 CKA shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SK52 CKA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SK52 CKA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.