2005 Subaru Impreza

Brake pipe corroded, covered in grease or other material both front to rear, at rear joint block (1.1.11 (c))

Exhaust noisy (8.1.1 (a))

Nearside Front Tyre worn close to legal limit/worn on edge edges worn close to limit (5.2.3 (e))

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced attachment bracket (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge edges worn close to limit (5.2.3 (e))

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced attachment bracket (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced underside, surface corrosion (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both trailing arms (5.3.3 (b) (i))

Brake pipe excessively corroded front to rear on rear joint block (1.1.11 (c))

Front Sub-frame attachment bracket/mounting insecure subframe, rear bolts loose (5.3.3 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i))

Offside Rear Brake pipe excessively damaged to flexi, sharply kinked on bend (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i))

Rear Service brake excessively binding both (1.2.1 (f))

Exhaust noisy (8.1.1 (a))

Nearside Front Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

Front Exhaust has a major leak of exhaust gases joint (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Front registration plate displaying a honeycomb or similar effect background (6.3.3)

Rear registration plate displaying a honeycomb or similar effect background (6.3.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Engine covers fitted obscuring some components in the engine bay

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

front fog has sharp on lense

front wipers smeering

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

front fog has sharp on lense

front wipers smeering

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

both front brake discs lipped/worn/wearing

both rear tyres perished and splitting and cut on outer sidewall of offside rear

offside mirror cover broken and incomplete but not affecting view to rear

surface corrosion on brake hose ferrules

surface corrosion on exhaust

front brake pads look low

rear fuel component secured by cable tie