2006 Toyota Aygo

Horn not working (7.7 (a))

Nearside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed (7.1.1 (a) (i))

Offside Rear Hydraulic brake cylinder excessively weakened by corrosion (1.1.16 (d) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Macpherson strut likely to fail Spring seat corroded (5.3.3 (b) (ii)) DANGEROUS

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside rear sill corroded but not holed

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

surface corrosion under car but not structural

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting area (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded outer (3.6.B.2c)

Offside Rear Brake pipe excessively corroded outer (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)