MOT Status
ExpiredMileage
149,181 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top (5.3.6 (a) (i))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Offside Rear Service brake excessively fluctuating (1.2.1 (e))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake pad(s) wearing thin Both (1.1.13 (a) (ii))
Front Suspension components covered in under seal
Rear Brake pad(s) wearing thin Both (1.1.13 (a) (ii))
Rear Suspension components covered in under seal
Under body covered in under seal
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
underside of vehicle corroded
Horn not working (7.7 (a))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake pipe clips or supports missing, pipe adequately supported flexi insecure (1.1.11 (d) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
underside of vehicle corroded
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
General underbody corrosion
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
General underbody corrosion
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint excessively worn front (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Central Rear Lower Exhaust mounting defective (6.1.2 (a))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Lower Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Horn not working (7.7 (a) (ii))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt rear arm (5.3.4 (b) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Service brake lagging in operation (1.2.1 (d))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))
Central Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Lower Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Brake pipe corroded, covered in grease or other material front to rear pipes (1.1.11 (c))
Horn not working (7.7 (a) (ii))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both arms (5.3.4 (b) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm bald on both edges (5.2.3 (e)) DANGEROUS
Central Exhaust mounting defective clamp (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))
Offside Obligatory mirror slightly damaged glass burst (3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge tyre on limit, bald on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material both front to rear at rear, corroded (1.1.11 (c))
Rear Service brake binding but not excessively both sides (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake pipe excessively corroded both (1.1.11 (c))
Rear Suspension arm pin or bush excessively worn both (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear rear brake binding (3.7.B.1)
Nearside Front coil spring broken (2.4.C.1a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brakes imbalanced across an axle 31% (3.7.B.5b)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner wall (4.1.D.1a)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Anti-roll bar linkage has slight play in a pin/bush drop link (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Rear Child Seat fitted not allowing full inspection of adult belt
Front brake discs worn and corroded
Rear brake discs worn and corroded
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake discs worn and corroded
Rear brake discs worn and corroded
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SK57 ZYZ is a 2007 Mazda 6 in Grey with a 1,798cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 51.7%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SK57 ZYZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SK57 ZYZ?
You can check the full history of SK57 ZYZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SK57 ZYZ registered?
SK57 ZYZ is a 2007 Mazda 6, first registered on 6 September 2007.
Is SK57 ZYZ safe to buy?
The MOT history for SK57 ZYZ shows 29 tests with a 51.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SK57 ZYZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SK57 ZYZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.