2008 BMW X6

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Engine. (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened Along with suspension components. (5.3.3 (b) (i))

Sub-frame corroded but not seriously weakened Along with suspension components. (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced General under body. (6.1.1 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Engine. (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened Along with suspension components. (5.3.3 (b) (i))

Sub-frame corroded but not seriously weakened Along with suspension components. (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced General under body. (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement INNER BUSH (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement INNER BUSH (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside rear tyre badly worn on inner edge

Nearside Front Nail in tyre

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Nail in tyre

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

engine covers and undertrays fitted obscuring components

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Windscreen washer not working (3.5 (a))

exhaust heat sheild insecure

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)