2009 Honda XL125V

Brake hose excessively damaged Front master cylinder hose (1.1.12 (b) (ii))

Brake lever insecure Lock but missing (1.1.2 (e) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Position lamp not working (4.2.1 (a))

Headlamp aim too low Both (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Rear Brake component insecure Rear calliper pad pin locking cap missing (1.1.21 (c))

Shock absorber has a serious fluid leak Both front (5.3.2 (b))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Steering operation impeded by a fairing RH lock (2.1.4 (e))

Chain guard missing

Drive chain worn but not considered excessive Tight spots (6.1.7 (c) (i))

Front Tyre worn close to the legal limit + heavily cracking to tread (5.2.3 (e))

Front tyre under inflated

Fuel cap sealing washer deteriorating

Offside front fairing insecure

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Valve stem seriously damaged (5.2.3 (j))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Drive chain excessively tight (6.1.7 (k) (i))

Headlamp aim projected beam image obviously incorrect kick up showing to the right (4.1.2 (c))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

rear tyre cracking slightly

Brake pedal cannot be applied smoothly (3.1.3d)

Brake pedal has inadequate reserve travel (3.1.3b)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Plate brake test indicates a binding brake (3.3.B1a)

Plate brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.B2b) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))