2003 Lexus IS200

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear disc back plate corroded and deteriorated

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear disc back plate corroded and deteriorated

Parking brake lever has little reserve travel (3.1.6b)

Play in steering rack inner joint(s) ()

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

fuel tank shield corroded and deteriorated

offside and nearside inner wheel near caliper area full of under sealant hard to check that area

rear brake fluctuating, but not excessively (3.7.B.3)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Exhaust noisy (7.1.4)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front caliper damp but not leaking

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust noisy (7.1.4)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front caliper damp but not leaking

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Front tyres inner edges wearing thin

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Rear tyres cracking on inner sidewalls

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Stop lamp not working (1.2.1b)

advise o/s n/s front tyres wearing on inside edge also o/s/f tyre on border of 1.6mm within 3/4 tread breadth on inside

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc slightly pitted (3.5.1h)