MOT Status
ExpiredMileage
111,363 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
both rear inner sills corroded
rear suspension corroded
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Position lamp light intensity significantly reduced LED unit failing (4.2.3 (a) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
both rear inner sills corroded
rear suspension corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /jack point area/sub frame arm mount (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /jack point area/sub frame arm mount (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake hose has slight corrosion to ferrule both sides NS and OS (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin inside pads (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened and attached components (Arms/mounts) (5.3.3 (b) (i))
Rear seat belts not tested (folded down and work equipment on top)
full engine covers and undertrays/shields fitted obscuring viewing some testable components.
underbody corrosion
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /jack point area/sub frame arm mount (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /jack point area/sub frame arm mount (5.3.6 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake hose has slight corrosion to ferrule both sides NS and OS (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin inside pads (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened and attached components (Arms/mounts) (5.3.3 (b) (i))
Rear seat belts not tested (folded down and work equipment on top)
full engine covers and undertrays/shields fitted obscuring viewing some testable components.
underbody corrosion
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Brake performance not tested (1.2.1 (g))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
nearside rear outer walls slightly damaged
nearside rear tyre outer walls slightly damaged
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
nearside front tyre outer wall damaged
Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
nearside front tyre outer wall damaged
Offside Rear position lamp(s) not in a clean condition but function not impaired (1.1.4a)
rear tyre wearing umevenly
wet test
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL05 BXJ is a 2005 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 85.7%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SL05 BXJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL05 BXJ?
You can check the full history of SL05 BXJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL05 BXJ registered?
SL05 BXJ is a 2005 Mazda 6, first registered on 24 March 2005.
Is SL05 BXJ safe to buy?
The MOT history for SL05 BXJ shows 21 tests with a 85.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL05 BXJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL05 BXJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.