2005 Mercedes-benz Vito

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded lower outer sill (5.2.6)

Offside Front Anti-roll bar linkage missing (2.4.G.1)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear rear brake binding both o/s and n/s (3.7.B.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Front Exhaust has a major leak of exhaust gases at clamp (7.1.2)

Front Lower Suspension arm has excessive play in a ball joint both o/s and n/s lower ball joints worn to excess (2.4.G.2)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust system not adequately supported mount broken (7.1.1)

Rear Parking brake lever has no reserve travel (3.1.6b)

Steering system excessively tight faulty steering rack (2.2.D.1)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Rear rear brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake pipe excessively corroded (3.6.B.2c)

Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Rear rear brake binding (3.7.B.1)

Nail in offside front tyre

rear siscs worn and scored

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Brake pedal spongy (3.3.B.1b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Parking brake lever has no reserve travel (3.1.6b)

Nail in offside front tyre

rear siscs worn and scored

nsf drop link is heavly worn

offside drop link is slightly worn

Brake pedal creeps down when held under pressure (3.3.B.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nsf drop link is heavly worn

offside drop link is slightly worn

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has a part missing (7.1.1a)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear coil spring incomplete (2.4.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Exhaust has part of the system slightly deteriorated (7.1.1a)