MOT Status
ExpiredMileage
124,725 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill excessively corroded (7.1.1 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill excessively corroded (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill excessively corroded (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill excessively corroded (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule all flexis (1.1.12 (f) (i))
Coil spring corroded all springs (5.3.1 (b) (i))
Front Brake pipe corroded, covered in grease or other material both fronts (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Coil spring corroded All Four (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Nail in tyre ()
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Tyre slightly damaged/cracking or perishing All Four 165 60 14 (5.2.3 (d) (ii))
Coil spring corroded All Four (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Nail in tyre ()
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Tyre slightly damaged/cracking or perishing All Four 165 60 14 (5.2.3 (d) (ii))
Exhaust has a major leak of exhaust gases exhaust manifold (6.1.2 (a))
Offside Front Lower Suspension arm pin or bush excessively worn inner bushes (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing turret (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Exhaust has a minor leak of exhaust gases at manifold (7.1.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
coil spring corroded both front (2.4.C.1b)
coil spring corroded both rear (2.4.C.1b)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Exhaust has a minor leak of exhaust gases at manifold (7.1.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
coil spring corroded both front (2.4.C.1b)
coil spring corroded both rear (2.4.C.1b)
Parking brake lever has little reserve travel (3.1.6b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake lever has little reserve travel (3.1.6b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Offside Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Offside Brake pipe leaking (3.6.A.1) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside rear brake grabbing slightly (3.7.A.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL06 OTZ is a 2006 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SL06 OTZ, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL06 OTZ?
You can check the full history of SL06 OTZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL06 OTZ registered?
SL06 OTZ is a 2006 Toyota Aygo, first registered on 31 March 2006.
Is SL06 OTZ safe to buy?
The MOT history for SL06 OTZ shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL06 OTZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL06 OTZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.