MOT Status
ValidMileage
139,600 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Front Exhaust mounting defective (6.1.2 (a))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Emissions unable to be completed (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Front Exhaust mounting defective (6.1.2 (a))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sills both sides (5.3.6 (a) (i))
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge and cracking on sidewall (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both outer sills rear (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both outer sills rear (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear beam is corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear beam is corroded
Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal. (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal. (6.2.2 (d) (i))
Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases rear box join leaking gases.also corroded and front exhaust mount broken off but still surported. (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security seal. (6.2.2 (d) (i))
Offside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security seal. (6.2.2 (d) (i))
both front shock casing corroded.
corroded all under vehicle
rear axle has corroded.
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Emissions not tested (7.3.A.1)
Exhaust has a major leak of exhaust gases back box (7.1.2)
Exhaust system not adequately supported back box (7.1.1)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL06 ZZV is a 2006 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SL06 ZZV, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL06 ZZV?
You can check the full history of SL06 ZZV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL06 ZZV registered?
SL06 ZZV is a 2006 Toyota Aygo, first registered on 30 April 2006.
Is SL06 ZZV safe to buy?
The MOT history for SL06 ZZV shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL06 ZZV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL06 ZZV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.