MOT Status
ExpiredMileage
150,228 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit edges worn (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak ()
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
smoke emmissions near limit
Nearside Front Tyre worn close to the legal limit edges worn (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak ()
Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
smoke emmissions near limit
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Exhaust system not adequately supported (7.1.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Child seat fitted not allowing full inspection of adult belt
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Under-trays fitted obscuring some underside components
dpf light staying on
Both front discs inner faces corroding / wearing
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
engine emits some smoke when revved
front discs very corroded on iner faces
Nail in nearside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL07 HBG is a 2007 Mazda 6 in Black with a 1,998cc diesel engine. This vehicle has been through 11 MOT tests with a personal pass rate of 72.7%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SL07 HBG, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SL07 HBG?
You can check the full history of SL07 HBG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL07 HBG registered?
SL07 HBG is a 2007 Mazda 6, first registered on 19 March 2007.
Is SL07 HBG safe to buy?
The MOT history for SL07 HBG shows 11 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL07 HBG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL07 HBG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.