MOT Status
ExpiredMileage
139,945 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn front (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Service brake fluctuating, but not excessively both (1.2.1 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Service brake fluctuating, but not excessively both (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Service brake fluctuating, but not excessively both (1.2.1 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Service brake fluctuating, but not excessively both (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt rear (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn front (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Service brake fluctuating, but not excessively both (1.2.1 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Service brake fluctuating, but not excessively both (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Inner and outer sills surface corrosion
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trayling arm (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated rear (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trayling arm (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint excessively worn front (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Inner and outer sills surface corrosion
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trayling arm (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated rear (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trayling arm (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside front brake binding (3.7.B.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.B.2)
Nearside Front Suspension arm has excessive play in a ball joint rearmost (2.4.G.2)
Nearside Front Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.B.2)
Vehicle structure has slight corrosion (6.1.A.1)
both front tyres wearing on inner edges
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt front (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear (2.4.G.2)
Offside front brake excessively fluctuating (3.7.B.3)
Vehicle structure has slight corrosion (6.1.A.1)
both front tyres wearing on inner edges
Child seat fitted not allowing full inspection of adult belt
Parking brake lever has little reserve travel (3.1.6b)
un derside corrosion
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Emissions not tested (7.0)
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front discs worn.
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL07 YCK is a 2007 Mazda 6 in Black with a 1,998cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SL07 YCK, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SL07 YCK?
You can check the full history of SL07 YCK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL07 YCK registered?
SL07 YCK is a 2007 Mazda 6, first registered on 1 March 2007.
Is SL07 YCK safe to buy?
The MOT history for SL07 YCK shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL07 YCK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL07 YCK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.