2007 Mazda 6

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & inner wheel arch excessively corroded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner wheel arch excessively corroded (5.3.6 (a) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor excessively corroded (6.1.1 (c) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both disks worn & corroded (nsf overheated) (1.1.14 (a) (ii))

Front Headlamp aim too high both sides (4.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output both headlights deteriorated (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread plate damaged & deteriorated (0.1 (b))

Front Upper Suspension arm ball joint dust cover severely deteriorated ball joint boot perished both sides (5.3.4 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge worn inside edge & perished (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Fuel Pipe/s corroded filler neck pipes corroded ()

Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sills corroded but not excessively (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes perished both sides (5.3.4 (a) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Fuel Pipe/s corroded fuel filler neck ()

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm / worn on edge (5.2.3 (e))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced lower boot section to bumper (6.1.1 (c) (i))

Oil leak, but not excessive slight (8.4.1 (a) (i))

Rear inner body heavily corroded

Sub-frame corroded but not seriously weakened front and rear sub frames (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Fuel Pipe/s corroded fuel filler neck ()

Items removed from driver's view prior to test ()

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm / worn on edge (5.2.3 (e))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced lower boot section to bumper (6.1.1 (c) (i))

Oil leak, but not excessive slight (8.4.1 (a) (i))

Rear inner body heavily corroded

Sub-frame corroded but not seriously weakened front and rear sub frames (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

general corrosion

nail in o/s/r tyre tread .......

Nearside Front position lamp(s) not working (1.1.A.3b)

nail in o/s/r tyre tread .......

exhaust leak centre section at rear split ..join flanges with rears in poor condition .......

nail in o/s/r tyre outer tread .......

exhaust joints corroding

suspension components starting to corrode

Front Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)

Bonnet cannot be secured in the closed position (8.4.1)