MOT Status
ValidMileage
99,897 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement bushes (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
patches of underseal on underside of vehicle
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement bushes (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
patches of underseal on underside of vehicle
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material Nearside and Offside (1.1.11 (c))
Position lamp not working Both front side lights not working (4.2.1 (a) (ii))
Stop lamp(s) not working Both rear brake lights not working (4.3.1 (a) (ii))
Suspension arm pin or bush excessively worn Offside front lower suspension arm bush deteriorated resulting in excessive movement (5.3.4 (a) (i))
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front anti roll bar drop link rubbers worn (5.3.4 (a) (i))
Brake pad(s) wearing thin Front brake pads on 2mm (1.1.13 (a) (ii))
Brake pipe corroded, covered in grease or other material Rear brake pipes covered in grease (1.1.11 (c))
Tyre worn close to legal limit/worn on edge NSF tyre worn on outer edge & close to limit (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Coil spring corroded n/s/f and both rear (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush in a poor condition (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear rear axle corroded
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear rear axle corroded
Front Exhaust mounting defective (6.1.2 (a))
Front wiper rubber torn
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Front Inner brake disc worn, pitted or scored, but not seriously weakened faces (3.5.1i)
Front wiper rubber torn
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (2.4.A.3)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Macpherson strut corroded but not seriously weakened spring seat (2.4.G.1)
Nearside Front Tyre worn close to the legal limit 2.5 mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit 2.0 mm (4.1.E.1)
Offside Front Macpherson strut corroded but not seriously weakened spring seat (2.4.G.1)
Offside Front Tyre worn close to the legal limit 3.0 mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 2.0 mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit 2.5 mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 2.0 mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit (4.1.E.1)
Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SL08 UKH is a 2008 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SL08 UKH, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SL08 UKH?
You can check the full history of SL08 UKH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SL08 UKH registered?
SL08 UKH is a 2008 Toyota Aygo, first registered on 31 March 2008.
Is SL08 UKH safe to buy?
The MOT history for SL08 UKH shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SL08 UKH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SL08 UKH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.